Search
-
Heavy Duty Light & Equipment Hangers allow you to secure items quickly and easily. patented system pulls tight, locks in place, will never break or slip, and will not rust. Made with special composite material. Heat and cold resistant. 8? braided polypropylene rope. Carabiner clips provide a secure hold. Great for hoisting and securing: -Reflectors. -Carbon Filters. -Light Fixtures. -Ventilation Equipment. -Maximum weight capacity is :Large- 150 lbs. each (300 lbs. a pair), Small- 75 lbs ( 150 lbs a pair) -Excellent for use with heavier equipment like carbon filters, ventilation equipment, hanging multiple light fixtures and more.
-
-
8% less
Grozone TP1 Day/Night Thermostat
DESCRIPTION
Controls cooling or heating equipment according to a daytime or nighttime set-point.
6 foot cord with temperature sensor precise to 2°F / 1°C.
Can power 120Vac equipment up to 15 amp.
Typical control differential stands between 4° and 7°F / 2° and 4°C.
INCLUDED MODULES AND ACCESSORIES
One plug-in type module.
One user guide.
One screw kit -
-
-
8% less
GrozoneCY1 Day & Night Periodic Timer with photocell
DESCRIPTION
- Controls any 120Vac equipment such as pumps or fans on a periodic repeat cycle.
- The ON duration spans from 10 sec to 20 minutes.
- The OFF duration spans from 1 minutes to 12 hours.
- The unit can function day and night or during day time only.
INCLUDED MODULES AND ACCESSORIES
- One plug-in type module.
- One user guide.
- One screw kit
-
-
The Bluelab Calibration Solutions are a very necessary part of a growers toolbox. They are required for the calibration and checking of Bluelab meters and controllers. Our solutions are manufactured specific to the calibration process and referenced to high class laboratory standards by Bluelab.
-
The Bluelab Calibration 250ml Solutions are a very necessary part of a growers toolbox. They are required for the calibration and checking of Bluelab meters and controllers. Our solutions are manufactured specific to the calibration process and referenced to high class laboratory standards by Bluelab. Bluelab's EC/CF equipment does not need calibrating as they are all factory calibrated here at Bluelab. The CF27.7 (EC2.77) solution is used as a reference or checking solution to ensure you have adequately cleaned the EC/CF probe. Calibration Solutions should be stored in a cool place out of direct sun and heat. Please keep out of reach of children. They should be stored with the lids securely tightened. Not replacing the lid after use will result in evaporation which causes the salt content in the solution to rise decreasing the validity of the solution. Contamination between solutions can easily occur, which will affect the validity of the calibration. Bluelab recommend that the solutions are de-cantered into a smaller vessel and the contents discarded when the calibration process has been completed.
-
-
8% less
GrozoneTP2 Adjustable differential Thermostat
DESCRIPTION
- Controls cooling or heating equipment according to a setpoint and an adjustable differential from 4° to 20°F / 2° to 11°C.
- 6 foot cord with temperature sensor precise to 2°F / 1°C.
- Can power 120Vac equipment up to 15 amp.
INCLUDED MODULES AND ACCESSORIES
- One plug-in type module.
- One user guide.
- One screw kit
-
-
-
8% less
GrozoneTP3 High temperature shut-off Thermostat
DESCRIPTION
- Automatically shuts down lighting and/or other equipment when a high temperature setpoint is reached.
- Once turned-off, the unit will run a user selected delay from 0 to 30 minutes before turning back on or will hold restart until manual reset (temperature setback of 5° or 10° F / 3° to 5°C).
- 6 foot cord with temperature sensor precise to 2°F / 1°C.
- Can power 120Vac equipment up to 15 amp.
- To be used in conjunction with 120Vac triggered high-load or light switcher like the LS1, LS2 or LS3.
INCLUDED MODULES AND ACCESSORIES
- One plug-in type module.
- One user guide.
- One screw kit
-
-
Only 6 left in stockCERMIC METAL HALIDE LAMP 1000W 3K & 4K
Ceramic metal halide 1000W lamps from Nanolux are the first of its kind which actually work. This low frequency lamp comes in both a 3K and 4K horticultural spectrum. Ceramic Metal Halide is different from your standard metal halide and HPS lamps. CMH lamps produce a much broader spectrum of light. This broad spectrum allows the plant to absorb more usable light, giving the plant a more natural morphology usually only found in Sun grown plants. Not only is there a more balanced PAR, CMH technology incorporates spectral wavelengths not found inside the PAR range, yet still helpful with increasing the quality of the plant. The added UV increases essential oil production, increases color expression, and shortens internodal spacing. While the added IR in the far red end of the spectrum increases the metabolism of the plant, thereby encouraging more aggressive growth. With the CMH 1000W lamp, this technology can now be fully utilized as a standalone lighting source. Our CMH 1000W fixtures are designed for commercial use and are suitable for vegetative and flowering purposes. The lamps are only intended for use in the Nanolux low frequency CMH ballast. The use of ultra-high frequency DE ballasts should be avoided.
3K Lamp (2908K)
4K Lamp (4279K)
-
Athena Cleanse is made from the ideal (and safe) root zone optimizing agents--Hypochlorous acid. This safe and mild acid is derived from salt and a proprietary electrochemical treatment process. The result is a unique, plant-safe chemical with powerful oxidative properties to keep your root zone clean and free of unwanted organic and mineral buildup. These special properties reduce mineral scale in irrigation systems.
Key Features
- Non-toxic and non-nutritive - Safe to use on plants in and stage of growth
- Works to descale irrigation systems and decompose residual organic matter
- Effective as a final flush to remove mineral buildup (scale) in growing media and irrigation lines
- Very low TDS - Doesn't throw off mineral balance
- Effective as a final flush to clean growing media
- Keeps irrigation system cleaner and running efficiently longer
- Reduces mineral buildup in media and lines
How To Use
System Maintenance:
Irrigation systems that are regularly maintained with Athena Cleanse treatment will last longer, and run more optimally throughout. This is because Cleanse helps break down scale, mineral buildup, and other organic matter that has been lodged in the system.
Regular Use:
Use a dilute mixture of 2-5 mL per gallon water for regular maintenance.
Severe Conditions:
Increase rate to 5-10 mL per gallon water for combatting severe reservoir and growing media conditions.
Cuttings/Clones:
Athena Cleanse a must for all cloning machines and fresh cuttings. Dip fresh cuttings in a solution of Cleanse (10 mL per gallon) to improve cell health and increase immunity. Seedlings and cuttings treated with Cleanse have more vigor and are more likely to grow into robust plants. Roots of plants treated with Cleanse will be bright white and bursting with tiny feeder root hairs.
These special properties reduce mineral scale in irrigation systems and the growing media.
RDWC and Other Recirculating Hydroponics Systems:
Any recirculating or deep water culture (DWC) irrigation system should use Athena Cleanse remove mineral residue and reduce scale. Irrigation water treated with Cleanse has a reduced risk of developing problems that are often associated with overwatering and insufficient oxygen levels, such as anaerobic microbial growth and biofilm buildup.
Using Cleanse in a recirculating or DWC system helps break down materials with lower solubility ratings, such as mineral complexes that are no longer available to plants. Mineral buildup and lockout is a major cause of deficiencies and plant health problems-solve these issues with Athena Cleanse.
Media/System Flush Mix:
Athena Cleanse at a rate of 5-10 mL/ gallon of water during the final flush stage to help reduce residual mineral buildup in the growing media.
This procedure may be used at any time during vegetative or flowering phases if the growing media or irrigation system develops mineral imbalance or unwanted buildup.
Foliar Applications:
Mix 375 mL Cleanse per gallon water and spray evenly. Test on a small area first to ensure no damage.
Surface Treatment/Cleaning:
Spraying cultivation surfaces, work areas and irrigation equipment with a dilute solution of Athena Cleanse (375 mL per gallon) helps maintain a clean and trouble-free environment without toxic and dangerous chemicals. Maintain operational excellence and extend equipment life, such as irrigation system filters, by running treated water through the system regularly.
-
Only 10 left in stockA grow tent designed to grow plants indoors by providing complete control over climate conditions. Featuring a quick-view observation window, this grow tent uses a waterproof oxford canvas with a 2000D thickness for higher durability and light-proofing. Cross-patterned diamond mylar lines the surface of the inner walls, which will reflect and maximize output from your grow light. To ensure maximum reflectivity and prevent light leaking, an inner ribbon stitching creates a seal that lines the zippers inside the grow tent. Additionally, the duct ports’ double cinching design closes them on either side to reinforce the light-proof sealing. Accessories include a waterproof floor tray, a built-in tool bag, and a mounting plate to install your controller onto the grow tent.
PREMIUM BUILD QUALITY
This growing tent is reinforced by its frame’s steel construction, utilizing 22 mm diameter poles compared to standard grow tents’ 18 mm poles. The corner pieces share the same rigidity that keeps the tent upright and sturdier than others. This, along with its roof beams, enables up to 150 pounds of grow equipment support when hung at intersecting points. A metallic finish protects the steel poles from long term wear and tear while presenting a clean aesthetic.
-
PRODUCT DESCRIPTION
A smart inline duct fan designed to quietly ventilate hydroponic grow rooms, boost heating/cooling to rooms, circulate fresh air, exhaust projects, and cool AV closets. Featuring an inline mixed-flow design, the duct fan can maintain airflow even in high static pressure applications. Contains an EC-motor with PWM-control for quiet and energy-efficient performance. The motor box containing the fan’s impeller and blades can be detached from the mounted frame for easy cleaning and maintenance. Includes a smart controller with dynamic climate and time-based programming and can connect to one additional fan. Complete kit includes one duct fan unit, one thermal controller, one corded thermal probe, two duct clamps, installation manual, and all necessary mounting hardware.
-
PRODUCT DESCRIPTION
The duct fan system is designed to quietly cool AV equipment rooms and closets, and to ventilate various air circulation and exhaust projects. Features an inline speed controller utilizing PWM-technology. Containing an inline mixed-flow design, the duct fan can maintain airflow even in high static pressure applications. Contains an EC-motor for a quiet and energy efficient performance. The motor box containing the fan’s impeller and blades can be detached from the mounted frame for easy cleaning and maintenance. Complete kit includes one duct fan unit, one inline speed controller, installation manual, and all necessary mounting hardware.
- 1
- 2