Search
-
The Nivola sulphur evaporator is a well designed evaporator which evaporates the right amount of sulphur safely and at the same time keeps energy consumption to a minimum. The chimney effect guarantees an optimum distribution of the sulphur in the greenhouse. The sulphur evaporator is suitable for growing a.o.t. roses, peppers and tomatoes. Nivola has specialised in fighting mildew throughout the world for more than 50 years. Nivola Sulphur Vaporizer Vaporizes elemental sulphur at the optimum temperature for powdery mildew control in greenhouses. Power: 120volt, 100watt ceramic element.112
-
CMH 630W Fixture ( No Bulbs Included )
Ceramic Metal Halide or CMH for short (some refer to it as CDM), is becoming more popular in the horticultural industry. The CMH lamps have a very broad light spectrum which is more similar to the sun itself than any other form of HID lamp. We have taken CMH technology and increased its operational efficiency, making the most comprehensive spectrum of light output for an HID fixture even better. The CMH lamps also have increased efficiency in PAR/Watt compared to other forms of HID lighting. The CMH fixture can be used as a primary veg light, a primary light for SOG applications, or a supplemental full spectrum light for large flowering operations.
Fully sealed, low frequency ballast is side mounted. The CMH 630W dual lamp fixtures allow for any combination of 315W CMH lamp K temperatures. Meets ETL Standards and uses 97% German reflective material. Both Nanolux CMH fixtures can be used with any 315W 3K or 4K horticultural lamp from all the leading quality brands.
- ETL Listed.
- 97% GERMAN REFLECTIVE MATERIAL
- Fully sealed commercial designed ballast
- NCCS Ready
- Uses 315W PGZX18 base CMH lamps (bulbs not included)
-
-
9% less
With ILUMINAR CMH light spectrum so close to sunlight, your plants receive a broader range of wavelengths of truly usable light. Engineered to be closer to a natural sunlight alternative, in comparison to other popular lighting solutions currently in the market. We have taken the tech and increased its operational efficiency making this model preferred among growers. Ceramic Metal Halide Lamps or “CMH” Lights wide spectrum of light provides more UV light, compared to other types of grow lights. When a larger yield is the desired outcome giving you the ILUMINAR CMH competitive edge, is the solution.
!!! Bulbs Not Included !!!
-
-
The ILUMINAR 630W DE CMH DE horticultural light was engineered to be the closest alternative to natural sunlight. We’ve taken cutting edge technology to design a ballast that runs efficiently and a reflector that will deliver maximum uniformity -- making this horticultural light more efficient than HPS or MH.
The CMH ballasts can be run independently or with the ILUMINAR Touch Controller or HASH Controller. The ballasts are also compatible with Priva, Hortimax and Argus controllers (0-10V Protocol), allowing you full control to dial in your gardens to specific requirements.
Ceramic Metal Halide or “CMH” lamps provide a wider spectrum and more UV light compared to other horticultural lights. When a larger more yield is the desired outcome, the ILUMINAR CMH gives you the competitive edge. Our CMH DE fixture reduces the cost of relamping while also minimizing overhead expenses.
!!! Bulb Not Included !!!
-
Includes: Hortilux 315w Bulb
The new EYE HORTILUX CMH 315 Grow Light System takes the next step for grow light systems. The short, compact reflector design maximizes light with 8% more light hitting the canopy and 30% more uniform light than the competition.
-
Only 6 left in stockCERMIC METAL HALIDE LAMP 1000W 3K & 4K
Ceramic metal halide 1000W lamps from Nanolux are the first of its kind which actually work. This low frequency lamp comes in both a 3K and 4K horticultural spectrum. Ceramic Metal Halide is different from your standard metal halide and HPS lamps. CMH lamps produce a much broader spectrum of light. This broad spectrum allows the plant to absorb more usable light, giving the plant a more natural morphology usually only found in Sun grown plants. Not only is there a more balanced PAR, CMH technology incorporates spectral wavelengths not found inside the PAR range, yet still helpful with increasing the quality of the plant. The added UV increases essential oil production, increases color expression, and shortens internodal spacing. While the added IR in the far red end of the spectrum increases the metabolism of the plant, thereby encouraging more aggressive growth. With the CMH 1000W lamp, this technology can now be fully utilized as a standalone lighting source. Our CMH 1000W fixtures are designed for commercial use and are suitable for vegetative and flowering purposes. The lamps are only intended for use in the Nanolux low frequency CMH ballast. The use of ultra-high frequency DE ballasts should be avoided.
3K Lamp (2908K)
4K Lamp (4279K)
-
The Nanolux DE Chill is the first DE commercial overlap fixture of its type on the market. The DE Chill is designed with an onboard ballast, is air cooled, and comes NCCS APP-ready. The air-cooled design removes up to 60% of heat load in grow facility environments. This greatly reduces the air conditioning required to maintain the growing environment at desired temperatures. The fully enclosed design uses an optical quality glass lens which only reduces light output by 6%. This 6% reduction is easily offset by the ability to lower your lights closer to your plants and therefore raising light intesities far above 20%. If left at the same height, one would only require 104 lights in a facility which would regularly require 100 open-style DE lights. The 4000W required to run the 4 additional lights and the small wattage draw for exhaust fans is minor compared to the savings from lower electrical consumption required to AC the growroom.
- 6 Dimming Settings 600 – 1200W Overdrive
- Powder Coated Steel Construction
- Fully Gasketed Lamp Change Door
- Replaceable 105khz 120/240v Ballast
- 3 Year Warranty
- Low Light Loss Tempered Glass
- Airtight Soldered Joint Construction
- Uses any 2100umol DE HPS Lamp. Will also fire any DE MH lamp
- 8” DUCT SIZE
- NCCS APP Ready
-
-
30% off
Only 9 left in stockThe Summit series modular system also allows different lamp arm configurations and a variety of reflectors for different growing styles.
Features
Full digital circuit ballast with maximum efficiency up to 93%
Pure aluminum alloy material is applied to help dissipate heat. Height and amount of crenate coolers (heat dissipation) are calculated accurately by thermodynamically technology. Products undergo rigorous testing to keep long-term safety and stability.
Reflector applies special material to achieve 97% reflectivity
It’s convenient and easy for users to regularly remove and clean, and easier to maintain the reflector. This design achieves highest efficiency of lighting. Reflector can enhance deeper penetration, which enables irradiation more evenly and guarantees the best angle for planting illumination area.
Ceramic socket with better insulation non-flammability
Alumina 95 ceramics with better hardness, high temperature and pressure resistance and non-flammability is applied for the socket that matches Nanolux patented design. The unique structure design is convenient and easy for users to replace and maintain the lamp and to guarantee the safety of production and management.
NCCS - your smart control system
The NCCS - Nanolux Cloud Control System provides precise control for all devices in a grow room through its simple and intuitive APP. At the heart of it is a software program that allows you to specify all of the parameters of your lighting and environmental control settings in your grow room.
Wide voltage range input
Applicable for voltage ranging from 120V-240V with excellent adaptability in different power supply conditions.
-
-
-
30% off
The Nanolux Summit series modular lighting system allows growers to invest in lighting systems that can be utilized in many different applications. The backbone of the Summit system is the Summit ballast. The Summit ballast is the first ballast that operates a range of lamp styles and wattages with the correct lamp voltage, operation frequency and strike voltage. The ballast will correctly operate all HPS, MH and CMH lamp configurations between 600W and 1000W. Simply select the correct lamp style and wattage and the ballast will now properly operate that way within the proper operational parameters.
The Summit series modular system also allows different lamp arm configurations and a variety of reflectors for different growing styles. Nanolux has also developed a new operational warranty chip which allows faster processing times on warranties and replacements. The Summit series ballast also operates between 208 – 277 volts allowing for the ballast to be any commercial voltage application.
- Exclusive ceramic industrial grade receptacle
- Strikes and is compatible with any industry DE MH, CMH or HPS lamp
- Designed for 5’ on center commercial overlap light grid
- Soft/Random start plug and play technology
- Lowest profile DE fixture on the market
-
