Athena

Items: 110 of 10, per page
  • The vegetative growth stage demands well-rounded nutrition to establish strong roots and lush foliage. Athena Pro Grow is a balanced soluble fertilizer blend formulated for commercial cultivators to streamline irrigation. Use with Athena Pro Core for a complete and balanced recipe.


    • Balanced NPK and essential microelements (when used with Pro Core)
    • Fully soluble dry fertilizer, no particulates or sediment
    • Works with any dosing system: Dosatron, Netaflex, Rhythm
    • Mixes completely at room temperature
    • Low heavy metal content

    Ideal for mixing stock tanks and compatible with all dosing systems. This large-grind mix is 100% soluble and will not clog irrigation systems or leave sediment in reservoirs.


    Mixing Instructions

    Always use in combination with Athena Pro Core. Measure by weight, not volume. Do not combine in dry or concentrate forms.


    Stock Tank: Mix at most 2.5 lbs per 1 gallon water, agitate well until dissolved. Dose at a rate according to desired solution strength.


    Reservoir: For every 1 gram of Pro Grow use 0.6 grams of Pro Core. See dosing chart for target EC mix rates.


    Ingredients

    Potassium Phosphate, Potassium Nitrate, Potassium Sulfate, Magnesium Sulfate, Iron DTPA 

    • $139.99
    Only 4 left in stock
  • Athena Pro Core provides strong baseline nutrition across all stages of plant growth. Nitrogen to assemble chlorophyll and amino acids. Calcium to build structure. Essential microelements to catalyze photosynthesis, enzyme production and a multitude of important plant processes.

     

    • Readily available Nitrogen, Calcium, and essential microelements
    • Fully soluble dry fertilizer, no particulates or sediment
    • Works with any dosing system: Dosatron, Netaflex, Rhythm
    • Mixes completely at room temperature
    • Low heavy metal content

    Ideal for mixing stock tanks and compatible with all dosing systems. This large-grind mix is 100% soluble and will not clog irrigation systems or leave sediment in reservoirs.


    We discourage mixing Pro Line in small amounts directly into the reservoir.  We would rather turn the Pro line into a concentrated liquid first  and then use that liquid to mix your batch tanks.


    Nutrient Preparation Steps for a STOCK CONCENTRATE:

    1. Get a measuring container that has accurate gallon marks on it.
    2. Fill half of the stock tank with water.
    3. Slowly pour granules into water while agitating, then mix thoroughly to solubilize.
    4. Add additional water until it gets exactly to the 12.5 gallon mark.
    5. Vigorously mix until all granules are solubilized.  

    Mix your BATCH RESERVOIR:

    Using the recommended 2 lb per gallon chart determine the ml per gallon to achieve your desired EC.


    Ingredients

    Calcium Nitrate, Iron EDTA, Manganese EDTA, Copper EDTA, Zinc EDTA, Boric Acid, Sodium Molybdate 

    • $139.99
    Only 4 left in stock
  • Flowering plants require higher amounts of phosphorous (P) and potassium (K) to increase flower bulk and support high-metabolic activities. Athena Pro Bloom contributes balanced levels macro and micro-elements including sulfur (S) used for increasing potency and flavors.

    • Balanced NPK and essential microelements (when used with Pro Core)
    • Fully soluble dry fertilizer, no particulates or sediment
    • Works with any dosing system: Dosatron, Netaflex, Rhythm
    • Mixes completely at room temperature
    • Low heavy metal content

    Ideal for mixing stock tanks and compatible with all dosing systems. This large-grind mix is 100% soluble and will not clog irrigation systems or leave sediment in reservoirs.


    Mixing Instructions

    Always use in combination with Athena Pro Core. Measure by weight, not volume. Do not combine in dry or concentrate forms.


    Stock Tank: Mix at most 2.5 lbs per 1 gallon water, agitate well until dissolved. Dose at a rate according to desired solution strength.


    Reservoir: For every 1 gram of Pro Bloom use 0.6 grams of Pro Core. See dosing chart for target EC mix rates.


    Ingredients

    Potassium Phosphate, Potassium Sulfate, Magnesium Sulfate, Iron DTPA 

    • $139.99
    Only 4 left in stock
  • Athena Grow is a simple and clean formula designed for the vegetative stage of growth and for non-flowering plants. Our careful balanced mineral ratios help facilitate optimal plant development including photosynthesis, healthy respiration, and robust stalk and root growth.


    This 2-part blended liquid formula should be used in equal amounts during the veg phase to stimulate the rapid onset of bud production, increase flowering sites, and promote high-quality yields.


    Formulas are sediment free and are compatible with all dosing and irrigation systems in including fine dripper heads. Small amounts of micro-particles are occasionally visible in some conditions but will not affect mineral balance or system compatibility.


    Application Rates

    Add 2-5 mL of Grow A per gallon of water during the vegetative growth phase.


    See Feed Schedules for specific application recommendations.


    Best Practices

    Shake well before use.

    • Use clean measuring instruments--do not put anything into the bottle.
    • Always use equal parts of Athena Grow A & B to maintain proper mineral ratios.
    • Monitor EC regularly and adjust accordingly based on crop and growth stage.
    • Adjust to pH to proper levels after mixing all fertilizers and additives.
    • Do not combine in undiluted form.
    • Store closed in original packaging at a temperature between 45° F and 85° F.
    • $54.99
  • Athena Grow is a simple and clean formula designed for the vegetative stage of growth and for non-flowering plants. Our careful balanced mineral ratios help facilitate optimal plant development including photosynthesis, healthy respiration, and robust stalk and root growth.


    This 2-part blended liquid formula should be used in equal amounts during the veg phase to stimulate the rapid onset of bud production, increase flowering sites, and promote high-quality yields.


    Formulas are sediment free and are compatible with all dosing and irrigation systems including fine dripper heads. Small amounts of micro-particles are occasionally visible in some conditions but will not affect mineral balance or system compatibility.


    Application Rates

    Add 2-5 mL of Grow B per gallon of water during the vegetative growth phase.


    See Feed Schedules for specific application recommendations.


    Best Practices

    Shake well before use.

    • Use clean measuring instruments--do not put anything into the bottle.
    • Always use equal parts of Athena Grow A & B to maintain proper mineral ratios.
    • Monitor EC regularly and adjust accordingly based on crop and growth stage.
    • Adjust pH to proper levels after mixing all fertilizers and additives.
    • Do not combine in undiluted form.
    • Store closed in original packaging at a temperature between 45° F and 85° F.
    • $54.99
  • Athena Bloom is a simple and clean 2-part formula designed for the flowering stage of growth for fruit and flower-producing plants. We blend top of the line macronutrients and chelated micronutrients to achieve greater nutrient uptake ability across a wider pH range in any combination of grow method, water-type and media.

    This 2-part blended liquid formula should be used in equal amounts during the flowering phase to stimulate the rapid onset of bud production, increase flowering sites, and promote high-quality yields.

    Formulas are sediment free and are compatible with all dosing and irrigation systems including fine dripper heads. Small amounts of micro-particles are occasionally visible in some conditions but will not affect mineral balance or system compatibility.

    Application Rates
    Add 2-7 mL of Athena Bloom A per gallon of water during the flowering phase.

    See Feed Schedules for specific application recommendations.

    Best Practices

    • Shake well before use.
    • Use clean measuring instruments--do not put anything into the bottle.
    • Always use equal parts of Athena Bloom A & B to maintain proper mineral ratios.
    • Monitor EC regularly and adjust accordingly based on crop and growth stage.
    • Adjust pH to proper levels after mixing all fertilizers and additives.
    • Do not combine in undiluted form.
    • Store closed in original packaging at a temperature between 45° F and 85° F.
    • $54.99
  • Athena Bloom is a simple and clean 2-part formula designed for the flowering stage of growth for fruit and flower-producing plants. We blend top of the line macronutrients and chelated micronutrients to achieve greater nutrient uptake ability across a wider pH range in any combination of grow method, water-type and media.


    This 2-part blended liquid formula should be used in equal amounts during the flowering phase to stimulate the rapid onset of bud production, increase flowering sites, and promote high-quality yields.


    Formulas are sediment free and are compatible with all dosing and irrigation systems in including fine dripper heads. Small amounts of micro-particles are occasionally visible in some conditions but will not affect mineral balance or system compatibility.


    Application Rates

    Add 2-7 mL of Athena Bloom B per gallon of water during the flowering phase.


    See Feed Schedules for specific application recommendations.


    Best Practices

    • Shake well before use.
    • Use clean measuring instruments--do not put anything into the bottle.
    • Always use equal parts of Athena Bloom A & B to maintain proper mineral ratios.
    • Monitor EC regularly and adjust accordingly based on crop and growth stage.
    • Adjust pH to proper levels after mixing all fertilizers and additives.
    • Do not combine in undiluted form.
    • Store closed in original packaging at a temperature between 45° F and 85° F.
    • $54.99
  • Athena PK is a balanced bloom boosting complement to our Bloom fertilizers. This clean liquid booster is designed to supplement during the mid- to late-flowering phase. Athena PK is a low Nitrogen booster that provides additional Phosphorus and Potassium that high-yielding plants require for maximal production. Many PK boosters add far too much of these elements and create a cascade of problems, such as reducing Calcium and Magnesium availability. Balanced elemental bioavailability is essential in the flowering phase to boost essential oil and terpene production.


    Application Rates:

    Add 3-10 mL per gallon of water during the flowering phase starting in week 3.


    See Feed Schedules for specific application recommendations.


    Best Practices

    • Shake well before use.
    • Use clean measuring instruments--do not put anything into the bottle.
    • Monitor EC regularly and adjust accordingly based on the crop and growth stage.
    • Adjust pH to proper levels after mixing all fertilizers and additives.
    • Store closed in original packaging at a temperature between 45° F and 85° F.
    • $54.99
  • Athena CaMg is designed to supplement either of our 2-part liquid formulas. Some cultivars and growing conditions may require higher doses of Calcium, Magnesium, Iron and Nitrogen during heavy growth and development phases. This product effectively corrects these common deficiencies without throwing off overall elemental balance. In systems using reverse osmosis (RO) water and plants grown in inert media, such as coco and rockwool, Athena CaMg is particularly useful. Although our 2-part formulas already provide sufficient levels of Calcium and Magnesium, some growers require find supplementation helpful in demanding conditions.


    Application Rates

    Add 2.5 mL per gallon of water during all stages as needed.


    See Feed Schedules for specific application recommendations.

    Best Practices

    Shake well before use.

    • Use clean measuring instruments--do not put anything into the bottle.
    • Some applications may require different dosages.
    • Recommended for hydroponic use, especially with inert media and when using reverse osmosis (RO) water.
    • Monitor EC regularly and adjust accordingly based on crop and growth stage.
    • Adjust to pH to proper levels after mixing all fertilizers and additives.
    • Store closed in original packaging at a temperature between 45° F and 85° F.
    • $54.99
  • Athena Cleanse is made from the ideal (and safe) root zone optimizing agents--Hypochlorous acid. This safe and mild acid is derived from salt and a proprietary electrochemical treatment process. The result is a unique, plant-safe chemical with powerful oxidative properties to keep your root zone clean and free of unwanted organic and mineral buildup. These special properties reduce mineral scale in irrigation systems.


     Key Features

    • Non-toxic and non-nutritive - Safe to use on plants in and stage of growth
    • Works to descale irrigation systems and decompose residual organic matter 
    • Effective as a final flush to remove mineral buildup (scale) in growing media and irrigation lines
    • Very low TDS - Doesn't throw off mineral balance 
    • Effective as a final flush to clean growing media
    • Keeps irrigation system cleaner and running efficiently longer
    • Reduces mineral buildup in media and lines 


    How To Use


    System Maintenance:

    Irrigation systems that are regularly maintained with Athena Cleanse treatment will last longer, and run more optimally throughout. This is because Cleanse helps break down scale, mineral buildup, and other organic matter that has been lodged in the system.


    Regular Use:

    Use a dilute mixture of 2-5 mL per gallon water for regular maintenance.


    Severe Conditions:

    Increase rate to 5-10 mL per gallon water for combatting severe reservoir and growing media conditions.


    Cuttings/Clones:

    Athena Cleanse a must for all cloning machines and fresh cuttings. Dip fresh cuttings in a solution of Cleanse (10 mL per gallon) to improve cell health and increase immunity. Seedlings and cuttings treated with Cleanse have more vigor and are more likely to grow into robust plants. Roots of plants treated with Cleanse will be bright white and bursting with tiny feeder root hairs. 


    These special properties reduce mineral scale in irrigation systems and the growing media.


    RDWC and Other Recirculating Hydroponics Systems:

    Any recirculating or deep water culture (DWC) irrigation system should use Athena Cleanse remove mineral residue and reduce scale. Irrigation water treated with Cleanse has a reduced risk of developing problems that are often associated with overwatering and insufficient oxygen levels, such as anaerobic microbial growth and biofilm buildup.


    Using Cleanse in a recirculating or DWC system helps break down materials with lower solubility ratings, such as mineral complexes that are no longer available to plants. Mineral buildup and lockout is a major cause of deficiencies and plant health problems-solve these issues with Athena Cleanse.


    Media/System Flush Mix:

    Athena Cleanse at a rate of 5-10 mL/ gallon of water during the final flush stage to help reduce residual mineral buildup in the growing media. 


    This procedure may be used at any time during vegetative or flowering phases if the growing media or irrigation system develops mineral imbalance or unwanted buildup.


    Foliar Applications:

    Mix 375 mL Cleanse per gallon water and spray evenly. Test on a small area first to ensure no damage. 


    Surface Treatment/Cleaning:

    Spraying cultivation surfaces, work areas and irrigation equipment with a dilute solution of Athena Cleanse (375 mL per gallon) helps maintain a clean and trouble-free environment without toxic and dangerous chemicals. Maintain operational excellence and extend equipment life, such as irrigation system filters, by running treated water through the system regularly. 

    • $89.99
Bestsellers